Determination of ethylene oxide content inn-Alcohol ethoxylates by proton nuclear magnetic resonance spectroscopy

Proton Fourier transform nuclear magnetic resonance spectral data were collected onn-alcohol ethoxylates and used to calculate the percent ethylene oxide (EO) content of then-alcohol ethoxylate without an internal or external standard. The accuracy and precision of the method were determined from ten repetitive analyses of hexaethylene glycol monon-dodecyl ether. The standard deviation was 0.23 wt% EO with a relative standard deviation of 0.40%. The method had a relative error of +0.55% and an absolute error of +0.32% EO. This paper was presented at the 20th ISF World Congress/83rd AOCS Annual Meeting and Exposition in Toronto, Canada, May 10–14, 1992.     

Lead Extraction from Contaminated Soil Using Water-Soluble Polymers

The applicability of water-soluble polymers as extractants for the remediation of heavy metal-contaminated soils has been explored using a lead-contaminated Superfund soil as a sample system. Polyethylenimine (PEI) was functionalized with bromo- or chloroacetic acid to give an aminocarboxylate chelating group, which effectively binds lead. The resulting polymer, PEIC, has extraction properties similar to the molecular chelator ethylenediaminetetraacetic acid. A series of studies was done to probe optimum conditions for lead extraction from soils obtained from the Cal-West Superfund site in New Mexico that contained approximately 10,000 ppm of Pb. In batch extraction experiments using polymer functionalized at two different levels, the polymers removed greater than 97% of the lead from the soils. Subsequent experiments demonstrated that the selective extraction of lead could be controlled by varying polymer functionalization levels. Concentration and regeneration of the polymers using ultrafiltration was also demonstrated. Release of lead from the polymer was accomplished by acidification to pH 1 with HCl. Subsequent ultrafiltration allowed recovery of the extractant polymer for reuse.     

Objective Measurement of Cognitive Fatigue in Multiple Sclerosis.

Objective: Objective examination of cognitive fatigue in persons with multiple sclerosis (MS). Participants: Fifty-six individuals with MS and 39 age- and education-matched healthy control subjects. Main Outcome Measures: Cognitive fatigue, operationalized as the failure to sustain effort over the course of a continuous working memory task; performance on the Paced Auditory Serial Addition Test was examined, with number of correct responses generated and responses produced under conditions of sustained central executive load as the dependent variables. Results: Cognitively impaired MS subjects produced significantly fewer correct responses than either nonimpaired MS subjects or healthy control subjects, who performed at a comparable level. Both MS groups, however, showed susceptibility to cognitive fatigue significantly earlier in time than the healthy group. Conclusions: Fatigue can influence performance even in the absence of cognitive impairment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Promotion Routes for Women Engineering Managers

ABSTRACT

Total quality management (TQM) has been increasingly accepted as a management philosophy. Criteria such as those contained in the Malcolm Baldrige National Quality Award (MBNQA) often guide TQM implementation. However, reports indicate that fully assessing TQM efforts is difficult and hiring experts to help with this task is expensive. Using survey instruments is an attractive alternative to full-scale assessment. Despite the availability of many papers covering organizational performance assessment, few instruments specifically address TQM evaluation. Furthermore, none of the TQM assessment instruments has been subjected to rigorous validation; thus, only modest confidence can be placed in results obtained from their use. This article proposes a quick and cost-effective instrument that is a simple questionnaire designed to assist organizations in conducting self-evaluations of their TQM programs. The proposed instrument is based on the seven categories of the MBNQA criteria and was developed in cooperation with the Excellence in Missouri Foundation, which administers the Missouri Quality Award (MQA). This article highlights how questionnaire results can be used to guide further TQM implementation efforts.     

Study of potential leakage on several stressed fittings for hydrogen pressures up to 700 bar

In order to improve risk analyses and influence the design of the future H₂ systems, an experimental study on “real” leaks qualification and quantification was performed. In H₂ energy applications, fittings appeared as a significant leakage potential and subsequently explosion and flame hazards. Thus, as a part of the “Horizon Hydrogène Energie” French program, four kinds of commercial fittings usually employed on H₂ systems were tested thanks to a new high pressure test bench – designed, setup and operated by INERIS – allowing experiments to be led for H₂ pressures until 700 bar. The fittings underwent defined stresses representative of H₂ systems lifetime and beyond. The associated leaks – when existing – are characterized in terms of flow rate.     

The effects of extrusion conditions and the addition of volatile compounds and flavour enhancers to corn grits on the retention of the volatile compounds and texture of the extrudates

Corn grits that were supplemented with isovaleraldehyde, ethyl butyrate, butyric acid and flavour enhancers were extruded under different processing conditions. Volatile compounds retained in the extrudates were isolated by dynamic headspace and analysed using gas chromatography–mass spectrometry. The expansion ratio, density and cut force to break down the extrudates were evaluated and aroma intensity was assessed using a multisample difference test. Butyric acid showed the greatest retention (96.4%), regardless of the extrusion conditions. All compounds were better retained when samples were extruded at 20% feed moisture and 90 °C processing temperature (2.9–81.0%), conditions that also resulted in greater aromatic intensity (moderate to moderate‐strong intensity). The addition of volatile compounds reduced the expansion ratio and cut force, whereas the addition of flavour enhancers increased the expansion ratio but reduced ethyl butyrate and butyric acid retention.     

Guidelines and recommendations for indoor use of fuel cells and hydrogen systems

Hydrogen energy applications often require that systems are used indoors (e.g., industrial trucks for materials handling in a warehouse facility, fuel cells located in a room, or hydrogen stored and distributed from a gas cabinet). It may also be necessary or desirable to locate some hydrogen system components/equipment inside indoor or outdoor enclosures for security or safety reasons, to isolate them from the end-user and the public, or from weather conditions.Using of hydrogen in confined environments requires detailed assessments of hazards and associated risks, including potential risk prevention and mitigation features. The release of hydrogen can potentially lead to the accumulation of hydrogen and the formation of a flammable hydrogen-air mixture, or can result in jet-fires. Within Hyindoor European Project, carried out for the EU Fuel Cells and Hydrogen Joint Undertaking safety design guidelines and engineering tools have been developed to prevent and mitigate hazardous consequences of hydrogen release in confined environments. Three main areas are considered: Hydrogen release conditions and accumulation, vented deflagrations, jet fires and including under-ventilated flame regimes (e.g., extinguishment or oscillating flames and steady burns). Potential RCS recommendations are also identified.